Why Source Steel Pipes from Turkey?
Finding a steel pipe supplier that combines competitive pricing with internationally recognized certifications, reliable delivery schedules, and the flexibility to handle both standard and custom orders is a real challenge for international buyers. Turkey offers a compelling answer.
Turkey is the world's 8th largest crude steel producer with 36.9 million tons of output in 2024 and the 5th largest steel exporter globally (source: World Steel Association, World Steel in Figures 2025). In steel pipe and tube production specifically, Turkey leads the Middle East region with approximately 2.7 million tons annually (source: IndexBox, Middle East Iron & Steel Pipe Market Report, 2024). This position is built on decades of capital investment, vertically integrated production lines, and strategic access to European, Middle Eastern, and Asian shipping routes.
MetalFromTurkey is a steel trading company built around a strong steel pipe production network in Turkey and reinforced by international supply partners we have worked with for many years. Through our contracted and approved production facilities, we provide access to over 1.7 million tons of annual capacity and more than 100 product variants. Our supply network spans certified mills in Turkey (Istanbul, Bursa), Italy (Vobarno), Romania (Ploiești), and the United States (Texas, Florida, Alabama).
What sets us apart:
- Over 65 years of steel pipe manufacturing experience since 1958
- Certified production network centered on Turkey with reach across Europe and North America
- Primary Turkey-based capacity supported by selected international partner facilities
- Certifications including ISO 9001, IATF 16949, API 5L, and API 5CT
- Door-to-door delivery with full customs and logistics support
- Prompt quote turnaround with dedicated sales representatives who speak your language
The MetalFromTurkey Advantage
Independent Quality Assurance. Unlike buying directly from a single mill, MetalFromTurkey provides an independent layer of quality control. Our QA team inspects products at the mill, during production, and before shipment — giving you third-party verification at no additional cost.
Multi-Mill Access, Single Point of Contact. Need ERW/HFW line pipes from one facility and precision automotive tubes from another? We coordinate production across multiple certified mills and deliver everything under one purchase order, one set of documentation, and one logistics plan.
Supply Chain Flexibility. When one mill is at full capacity or a specific grade is in short supply, our network of qualified manufacturers means we can source alternatives without compromising on quality or delivery timelines.
End-to-End Project Management. From material selection and mill qualification through production monitoring, inspection, documentation, customs clearance, and door-to-door delivery — we manage every step so you don't have to.
Our Steel Pipe Product Range
We supply steel pipes and tubes for every major application — from energy infrastructure to precision automotive components. Each product category is produced at our partner mills to international standards, with quality verified by our inspection team and backed by comprehensive documentation.
Stainless Steel Pipes & Tubes
In addition to our carbon steel range, we supply a comprehensive portfolio of stainless steel pipes and tubes (also known as SS tubes or inox pipes) through our certified partner mills. Stainless steel's chromium content (minimum 10.5%) creates a passive oxide layer that delivers exceptional corrosion resistance, making it the material of choice for demanding chemical, pharmaceutical, food processing, and marine environments.
Manufacturing methods available:
Available grades:
Standards compliance: ASTM A312, ASTM A269/A270, ASTM A358, EN 10217-7, DIN 2462, JIS G3459, ASME BPE (sanitary), 3-A Sanitary Standards
Product categories:
Applications: Chemical processing, oil & gas (sour service), pharmaceutical manufacturing, food & beverage, desalination, marine, automotive exhaust systems, hydraulic cylinders, heat exchangers, architectural
- Welded (TIG/GTAW & Plasma; EFW for large diameters): Cost-effective production for diameters 21.3 mm to 339.7 mm, wall thicknesses 0.5 mm to 12.7 mm. TIG/GTAW and plasma welding are preferred for sanitary and high-purity applications.
- Seamless: Hot-extruded from solid billets for maximum pressure resistance. OD range 6 mm to 660 mm, wall thickness 1 mm to 60 mm. Ideal for high-pressure, high-temperature service per ASME/API ratings.
- Cold drawn precision: Tight tolerances (±0.05 mm OD achievable), superior surface finish (Ra 0.4 μm or better). For hydraulic cylinders, automotive components, and instrumentation.
- 304/304L: General purpose austenitic — excellent formability, cost-effective for non-chloride environments
- 316/316L: Molybdenum-enhanced — superior chloride and marine corrosion resistance
- 321: Titanium-stabilized — elevated temperature service up to 900°C
- 310S: High chromium-nickel — continuous service up to 1,100°C
- 317L: Superior acid resistance — pulp & paper, chemical processing
- 904L: Super-austenitic — extreme corrosive environments (FGD systems, chemical tankers)
- Duplex 2205/2507: High strength + corrosion resistance — offshore, desalination
- Industrial pipes: Schedule 5S to XXS, pressure ratings up to 30,000 PSI, temperature range -196°C to +600°C, NACE MR0175 sour service capability
- Sanitary tubes: Electropolished to Ra ≤ 0.4 μm, FDA/cGMP compliant, Tri-Clamp/SMS/DIN 11851 connections for food, dairy, pharmaceutical, and biotech
- Automotive tubes: Exhaust systems (409, 439, 304), shock absorbers, fuel lines (316L per SAE J2260), IATF 16949 certified
- Hydraulic & pneumatic tubes: Honed ID (Ra 0.2–0.8 μm), working pressure up to 700 bar, EN 10305-1/4 standards
ERW/HFW Line Pipes
Electric Resistance Welded / High Frequency Welded (ERW/HFW) line pipes are the backbone of oil, gas, and water transmission networks. The ERW/HFW line pipes in our supply range are offered primarily through our Turkey-based production network and, where project requirements call for it, through selected international partner facilities, covering an outside diameter range of 21.3 mm to 339.7 mm (NPS 1/2 to 13-3/8) with wall thicknesses from 2.8 mm to 12.7 mm and lengths up to 18.3 meters.
Production standards: API 5L (PSL 1 and PSL 2), CSA Z 245.1, ISO 3183, SI 530
Available grades: A, B, X42, X46, X52, X56, X60, X65, X70
Key features:
Applications: Natural gas transmission, crude oil pipelines, water distribution mains, industrial process piping
- Full body and weld seam heat treatment depending on diameter range
- Non-destructive testing aligned with ISO 10893 series (including ISO 10893-2, ISO 10893-3, and ISO 10893-10) according to product standard and project specification
- Finishing options include plain end, beveled, threaded, and Zaplok connections
- Coatings available: 3-layer PE/PP coating (DIN 30670/30678), FBE, epoxy lining (AWWA C210)
- Mill Test Certificates per EN 10204 (3.1 standard; 3.2 third-party countersigned on request)
OCTG — Casing and Tubing
Our Oil Country Tubular Goods (OCTG) supply range includes API 5CT certified casing and tubing designed for demanding downhole environments. The range covers outside diameters from 26.7 mm (1.050") to 339.7 mm (13.375") in the full ERW grade spectrum.
Available grades: H40, J55/K55, L80, N80, FBNAU, P110, Q125, plus proprietary as-rolled 80 and 90 grades
Enhanced capabilities:
Applications: Oil and gas well casing, production tubing, directional drilling, hydraulic fracturing
- High collapse versions of L80 and P110 grades for challenging well conditions
- Premium and semi-premium threaded connections available alongside standard API 5B threading
- 100% hydrostatic testing in-place and steady scarfing with full weld line ultrasonic inspection
- NACE MR0175 / ISO 15156 sour-service capable options available based on service conditions and project requirements
- Heat number and lot traceability maintained from pipe body to MTC for project QA packages
- Suitable for directional drilling and multiple fracturing operations
- Casing available in Range 1 through Extra Long (up to 65 feet)
Helically Welded Line Pipes (HSAW)
For large-diameter pipeline projects, the helically welded (spiral) pipes we source are supplied primarily through our core partner mills in Turkey and complemented by selected international partner facilities for specific project needs, in diameters from 610 mm (24") to 1,524 mm (60") with wall thicknesses up to 25.4 mm (1.000").
Production standards: API 5L, CSA, ISO 3183
Coating options: FBE (Fusion Bonded Epoxy), Moisture-Resistant Overcoat (MRO), Abrasion-Resistant Overlay (ARO), Rough Coating, Concrete Weight Coating (CWC), and Flow Coat Epoxy for interior lining
Applications: Long-distance oil and gas transmission, water trunk mains, piling, offshore pipelines
View HSAW Product Details →Longitudinally Welded Line Pipes (SAWL/LSAW)
The submerged arc welded longitudinal (SAWL) pipes available through our network deliver heavy-wall capability in diameters from 610 mm to 1,524 mm with wall thicknesses up to 38.1 mm (1.500").
Key capabilities:
Applications: High-pressure gas transmission, sour service pipelines, subsea pipelines, infrastructure projects
- High strength grades up to X80 / L555
- Sour service capability up to X70 / L485
- Single lengths up to 12 m or double-jointed lengths up to 24 m (80 feet)
Tubes for Pressure Purpose / Boiler Tubes
Designed for high-temperature and high-pressure service, the boiler tubes we supply meet ASTM A192, ASTM A210, ASTM A178, EN 10216-2, and are PED-certified under Pressure Equipment Directive 2014/68/EU.
Size range: 21.3 mm to 339.7 mm OD, 2.0 mm to 12.7 mm wall thickness
Material grades: GrA, GrC, GrD, P195 TR1/TR2, P235 TR1/TR2, P265 TR1/TR2, P195 GH, P235 GH, P265 GH, P355 N, P355 NH
Applications: Power generation boilers, heat exchangers, steam systems, pressure vessels
Water Transmission Pipes
Our water transmission portfolio covers ERW, LSAW, and HSAW/SSAW steel pipes for potable water, irrigation, and industrial distribution projects.
Production standards: EN 10224, EN 10255, ISO 65, ASTM A53 Type E/S Grade A/B, ASTM A795, ASTM A589
Available series (EN 10255): Light (L/L1/L2), Medium (M), and Heavy (H) series
Finishing options: Plain end, threaded and coupled (up to 168.3 mm OD), grooved (per Victaulic standard), hot-dip galvanizing, PE/PP coating
Pressure guarantee: Medium-series pipes guaranteed up to 25 bar operating pressure for water service
Applications: Municipal water supply, irrigation systems, fire protection, gas distribution
Explore Water Transmission Pipes →Fire Sprinkler Pipes — Firesist® Range
The Firesist® fire protection pipe range we distribute is one of the most comprehensive in the market, offering four distinct product lines to match every project requirement and budget. For sprinkler engineering, ASTM A795 is applied for dedicated fire sprinkler service and ASTM A53 is used for general-purpose pressure piping:
Firesist Plus (Premium): Epoxy-coated up to 250 microns, C4-M corrosivity category certified, regroovable, suitable for continuous operation up to 98°C. Available in Gray (RAL 7012) and Red (RAL 3000).
Firesist Epoxy: Powder epoxy coating up to 100 microns, available in five colors. Eliminates field painting and holds the widest range of UL and FM approvals.
Firesist Primer Varnished: Economical corrosion protection with 20–25 micron varnish coating, available in six colors.
Galvanized: Superior zinc coating (50–55 microns) for long-lasting corrosion resistance. Compatible with wet, dry, pre-action, and deluge sprinkler systems. DVGW certified.
All fire sprinkler pipes feature:
System compatibility: Compatible with NFPA 13 design and installation requirements where specified by project documents.
- UL Listed and FM Approved configurations (including UL 852 / FM 1630 references per approved model and listing scope)
- Groove-ready options for Victaulic-compatible systems
- Schedule 10 and Schedule 40 alternatives depending on hydraulic and budget requirements
- CE and UKCA certification for EN 10217-1/2
- Pressure ratings up to 300 psi
- Size range from ½" to 12"
- Inner weld seam removal and custom lengths available
Construction Pipes — Circular Hollow Sections & Piling Tubes
For structural applications, we supply circular hollow sections (CHS) to EN 10219, EN 10210, and ASTM A 500 in diameters from 21.3 mm to 339.7 mm. Our supply range also includes self-drilling anchor pipes (21.3 mm to 88.9 mm OD) and foundation/piling tubes in both ERW (up to 339.7 mm) and large-diameter welded formats (610 mm to 1,524 mm).
Piling tube grades: S355 J2H, S460 MH, S550 J2H per EN 10219-1, and ASTM A252 Grade 3
Applications: Building frameworks, bridges, stadiums, solar structures, tunneling, micro-piling, foundation engineering
Automotive and Industrial Precision Tubes
Our precision tube supply includes welded cold-sized, cold-drawn, and custom-shaped tubes for critical automotive and industrial applications, sourced primarily through our strong production base in Turkey and complemented by long-standing specialized partner facilities in Italy and Romania.
Production standards: EN 10305-1 (seamless cold drawn), EN 10305-2 (welded cold drawn/ERW), EN 10305-3 (welded cold sized/HFW), ASTM A513
Steel grade range:
Precision capabilities:
Automotive applications: Shock absorbers, steering columns, cardan shafts, stabilizer bars, cross-car beams, seat frames, tie rods, axle components, exhaust systems
- Structural steels: S235, S275, S355
- Deep drawing steels: DC01, DC03, DC04
- HSLA steels: up to S700MC
- Dual-phase steels: DP500, DP600, DP800, DP1000
- Heat treatable steels: 20MnB5 through 34MnB5
- Coated steels: galvanized and aluminized options
- Outside diameters from 5 mm to 130 mm (cold-sized and cold-drawn)
- Wall thicknesses from 0.70 mm to 11 mm
- Tolerance classes per EN 10305 with custom tolerances available
- IATF 16949 automotive quality management certification
Custom-Shaped Steel Profiles
Beyond standard round, square, and rectangular sections, our partner mills manufacture custom-shaped profiles using direct roll forming, HFW + cold forming, and cold drawing technologies. These profiles are designed to meet exact customer drawings and specifications for automotive, construction, agricultural machinery, and furniture applications.
Further processing available: precision length cutting, bending, hole drilling, online die stamping
Coatings and Linings
Corrosion protection is critical to pipe longevity. We offer a comprehensive range of external and internal coatings applied at our partner facilities, with coating quality verified through our inspection protocols:
External coatings: 3-layer polyethylene (PE) per EN ISO 21809-1 / DIN 30670, 3-layer polypropylene (PP) per ISO 21809-3 / DIN 30678, Fusion Bonded Epoxy (FBE) per ISO 21809-2, Abrasion-Resistant Overlay (ARO), Glass Fibre Reinforced Plastic (GRP), and hot-dip galvanizing
Internal linings: Flow-coat epoxy (API RP 5L2) for gas transmission throughput improvement, liquid epoxy (AWWA C210) for potable water hygiene
Testing performed: Coating thickness measurement, holiday testing, cathodic disbondment, impact strength, adhesion test, indentation strength, DSC analysis, and more
Typical DFT guidance: FBE typically 400–600 μm, 3LPE typically 2–4 mm depending on project class
Cathodic protection compatibility: Coating and CP system coordination can be aligned with ISO 15589-1 project requirements
Temperature guidance: 3LPE systems are typically selected up to ~80°C and 3LPP systems up to ~140°C based on service design and specification
Material Grade Selection Guide
Choosing the right steel grade directly impacts your project's performance, service life, and total cost of ownership. Below is a quick-reference guide covering both carbon steel and stainless steel grades available through our supply network.
Carbon Steel Grades — Line Pipe & Structural
| Grade | Min. Yield Strength | Typical Applications | Key Standard |
|---|---|---|---|
| API 5L Gr.B / X42 | 245–290 MPa | Low-pressure gas/water pipelines, general service | API 5L, ISO 3183 |
| X52 / X56 | 359–386 MPa | Medium-pressure oil & gas transmission | API 5L PSL 2 |
| X60 / X65 | 414–448 MPa | High-pressure gas transmission, cross-country pipelines | API 5L PSL 2 |
| X70 / X80 | 483–552 MPa | Ultra high-pressure, sour service, deep-sea pipelines | API 5L PSL 2 |
| S355 J2H | 355 MPa | Structural hollow sections, buildings, bridges | EN 10219, EN 10210 |
| S460 MH / S550 J2H | 460–550 MPa | Heavy-duty piling, offshore foundations | EN 10219-1 |
| L80 / P110 | 552–758 MPa | OCTG casing & tubing, directional drilling | API 5CT |
Stainless Steel Grades — Corrosion-Resistant Applications
| Grade | Key Composition | Best For | Cost vs. 304 |
|---|---|---|---|
| 304 / 304L | 18% Cr, 8% Ni | General fabrication, food equipment, freshwater — non-chloride environments | Base |
| 316 / 316L | 16% Cr, 10% Ni, 2% Mo | Marine, chemical, pharmaceutical, coastal — chloride resistance | +20–30% |
| 321 | 18% Cr, 10% Ni, Ti stabilized | Exhaust systems, heat exchangers — service up to 900°C | +15–25% |
| 310S | 25% Cr, 20% Ni | Furnaces, kilns, heat treatment — service up to 1,100°C | +40–60% |
| 317L | 18% Cr, 14% Ni, 3.5% Mo | Pulp & paper, aggressive chemical processing | +30–40% |
| 904L | 20% Cr, 25% Ni, 4.5% Mo, Cu | FGD systems, chemical tankers — extreme corrosion | +80–100% |
| Duplex 2205 | 22% Cr, 5% Ni, 3% Mo | Offshore oil & gas, desalination — high strength + corrosion | +50–70% |
How to Choose: Quick Decision Guide
- Standard pipeline (non-corrosive): Start with API 5L Gr.B or X42. Upgrade to X60/X65 for high-pressure transmission.
- Structural applications: S355 J2H covers most building and bridge needs. S460+ for heavy-duty piling and offshore.
- General corrosion protection needed: 304/304L for indoor, freshwater, food processing. Move to 316/316L the moment chlorides, seawater, or chemicals are involved.
- High-temperature service: 321 up to 900°C, 310S up to 1,100°C. For carbon steel pressure service, use P-grade boiler tubes.
- Extreme chemical or offshore: Duplex 2205 for strength + corrosion. 904L for the most aggressive chemical environments.
- Rule of thumb: If there's any doubt about corrosion potential, invest in 316L — the 20–30% cost premium is minimal compared to premature failure and replacement.
Quality Certifications and Standards
Every steel pipe we supply undergoes rigorous testing and inspection — both at the mill level and through our independent quality assurance process. Our partner mills' quality management systems are certified and audited by internationally recognized bodies, and we perform additional verification before shipment.
Quality management certifications:
- ISO 9001:2015 — Quality Management System
- IATF 16949 — Automotive Quality Management System
- ISO 14001:2015 — Environmental Management System
- ISO 45001 — Occupational Health and Safety
- ISO 10002 — Complaints Handling Management (first in global steel pipe industry)
- API Q1 — Quality Management for Manufacturing Organizations
- TSE EN/ISO/IEC 17025 — Laboratory Accreditation
International product certifications: API 5L, API 5CT, AD-MERKBLATT W0/TRD 100, DVGW, PED (2014/68/EU), CE Marking (EN 10210, EN 10219), FM Approval, UL/CUL Listed, NSF Certified
"Our quality assurance process begins with partner mill qualification and continues through production monitoring, in-line inspection, and pre-shipment verification. Every pipe we deliver has been independently verified to meet or exceed the requirements of the applicable standard. We do not compromise on quality, because our customers' projects cannot afford compromise."
— Quality Assurance Director, MetalFromTurkeyValue-Added Processing & Custom Fabrication
Beyond standard pipe supply, we coordinate additional processing services through our partner mills and specialized workshops — delivered as part of your order with no need for secondary suppliers.
Precision cutting: Length tolerance ±0.5 mm with burr-free edges, miter cutting for piping assemblies, and orbital tube cutting for sanitary applications.
End preparation: Beveling for weld prep (30°, 37.5°, 45° angles), NPT/BSP threading per ISO 7/1, grooving for Victaulic mechanical coupling systems, and flange weld-end facing.
Surface finishing: Electropolishing to Ra ≤ 0.4 μm for pharmaceutical-grade pipes, mechanical polishing (grit 120 through 600), passivation per ASTM A380/A967, and pickling for post-weld heat tint removal.
Bending & forming: Mandrel bending for tight radii with minimal wall thinning, induction bending for large-diameter pipes, swaging for reducer ends, and custom flaring/beading.
Testing & inspection: Hydrostatic testing up to 10,000 PSI, PMI (Positive Material Identification) via XRF analysis, dimensional CMM and laser scanning verification, and full NDT capabilities including UT, ET, RT, and PT.
Technical Specifications at a Glance
| Product Category | Outside Diameter | Wall Thickness | Length | Key Standards |
|---|---|---|---|---|
| ERW/HFW Line Pipes | 21.3–339.7 mm | 2.8–12.7 mm | Up to 18.3 m | API 5L, ISO 3183 |
| OCTG Casing & Tubing | 26.7–339.7 mm | 2.87–13.06 mm | Up to 18.3 m | API 5CT |
| HSAW Pipes | 610–1,524 mm | Up to 25.4 mm | Up to 24 m | API 5L, ISO 3183 |
| SAWL Pipes | 610–1,524 mm | 9.5–38.1 mm | Up to 24 m (DJ) | API 5L, CSA Z245.1 |
| Boiler Tubes | 21.3–339.7 mm | 2.0–12.7 mm | Up to 18.3 m | ASTM A192/A210/A178, EN 10216-2 |
| Water Pipes | 21.3–339.7 mm | 2.0–12.7 mm | Up to 18.3 m | EN 10255, ASTM A53 Type E/S |
| Fire Sprinkler Pipes | ½"–12" | Per schedule | Custom | ASTM A53/A795, EN 10217 |
| Construction CHS | 21.3–339.7 mm | 2.0–12.7 mm | Up to 18.3 m | EN 10219, ASTM A500 |
| Precision Tubes | 5–130 mm | 0.70–11 mm | Custom | EN 10305-1/2/3 |
| Piling Tubes (HSAW) | 610–1,524 mm | Up to 38.1 mm | Custom | EN 10219, ASTM A252 |
| SS Welded (TIG/Plasma) | 21.3–339.7 mm | 0.5–12.7 mm | Up to 18.3 m | ASTM A312, EN 10217-7 |
| SS Seamless | 6–660 mm | 1–60 mm | Random / Custom | ASTM A312, ASTM A269 |
| SS Cold Drawn Precision | 4–120 mm | 0.5–10 mm | Custom | EN 10305-1/4 |
| SS Sanitary Tubes | 12–168 mm | 1.5–3.0 mm | Custom cut | ASME BPE, 3-A |
Industries We Serve
Our steel pipe products support critical infrastructure and manufacturing across multiple sectors:
Energy — Oil & Gas: OCTG casing and tubing, ERW/HFW and HSAW/SAWL/LSAW line pipes with sour service and high-collapse capabilities for upstream, midstream, and downstream applications. Our line pipes have been supplied to major cross-country pipeline projects across the Middle East and Central Asia, including high-pressure natural gas transmission lines and underground gas storage facilities.
Water Infrastructure: ERW water pipes, galvanized pipes, and large-diameter HSAW pipes for municipal water supply, irrigation, and wastewater treatment systems. Past projects include large-diameter water transmission pipelines for metropolitan water networks in the Eastern Mediterranean region.
Fire Protection: The Firesist® range of UL/FM approved sprinkler pipes with epoxy, galvanized, and premium coatings for commercial and industrial fire protection systems. Installed in major commercial complexes, logistics parks, and industrial facilities across the EU and Middle East.
Construction & Structural: Circular hollow sections, piling tubes, self-drilling anchor pipes, and custom profiles for buildings, bridges, solar structures, and foundation engineering.
Automotive: IATF 16949 certified precision tubes for shock absorbers, steering components, seat frames, stabilizers, exhaust systems, and drivetrain parts.
Power Generation: Boiler tubes and pressure-purpose pipes for thermal power plants, heat recovery systems, and industrial heating.
Mechanical & Hydraulic: Cold-drawn precision tubes for hydraulic cylinders, pneumatic systems, drilling equipment, and industrial machinery.
Chemical & Pharmaceutical: Stainless steel pipes (316L, 317L, 904L) for reactor piping, transfer lines, clean steam distribution, WFI water systems, and CIP/SIP circuits. Sanitary tubes electropolished to Ra ≤ 0.4 μm with ASME BPE and FDA compliance.
Food & Beverage: 3-A Sanitary Standard compliant stainless tubes for dairy processing, brewing, beverage production, and aseptic (UHT) systems. Crevice-free connections and drainable configurations.
Marine & Desalination: Duplex and super-austenitic stainless grades (2205, 2507, 904L) for seawater intake, brine disposal, and offshore platform piping where chloride resistance is critical.
Ready to Discuss Your Project?
Our sales engineers respond promptly with detailed pricing and specifications.
Procurement Guide for Industrial Buyers
Whether you are sourcing standard carbon steel line pipes or specialty stainless steel grades, understanding lead times, minimum quantities, and cost optimization strategies helps streamline your procurement process.
Minimum Order Quantities
- Carbon steel (ERW, HSAW, OCTG, construction): Standard MOQ is 5 tons. Flexibility available for ongoing supply agreements or project-based orders.
- Stainless steel — commodity grades (304, 316L): 500 kg to 1 ton for standard sizes.
- Stainless steel — specialty grades (duplex, 904L): 2 to 5 tons, project-based negotiation.
- Stock items: No minimum quantity — subject to availability from our partner mills' inventories.
Lead Times
Carbon steel: Production lead time 7–21 days depending on product type and quantity. Delivery to EU 10–15 business days, Middle East 7–12, Central Asia 15–20, USA 20–30.
Stainless steel: Stock items 1–2 weeks. Standard production 4–8 weeks ex-works. Custom specifications 8–12 weeks. Specialty alloys (duplex, 904L) 12–16 weeks including material procurement. Expedite options available at +15–25% premium.
Cost Optimization Tips
Consolidate orders across product categories to reach production minimums and reduce per-unit logistics costs. Standardize sizes and grades across your facility to leverage volume pricing. Plan ahead for specialty stainless grades — early ordering avoids expedite charges. Consider mill-length purchases (6 m or 12 m standard) instead of cut-to-length to reduce processing costs.
Incoterms & Payment
Payment terms: T/T (50% advance + 50% before shipment), Sight L/C, Usance L/C, D/P, and D/A for established customers. Net 30–60 days available upon credit approval.
Delivery options: EXW (ex-works pickup), FOB (loaded at origin port), CIF (delivered to destination port), DDP (door-to-door, duties included). We handle all packaging, containerization (FCL & LCL), customs documentation, and logistics coordination.
How to Order Steel Pipes from MetalFromTurkey
When you buy steel pipe from Turkey through MetalFromTurkey, our ordering process is straightforward and fully supported at every stage:
Step 01 — Submit Requirements. Use our online quote form or email sales@@metalfromturkey.com with your specifications: product type, standard/grade, dimensions, quantity, coating requirements, and destination.
Step 02 — Receive Quotation. Our sales team responds promptly with a detailed Proforma Invoice including pricing, lead times, and shipping options.
Step 03 — Production. Upon order confirmation, production begins at our partner mills under our quality supervision. Typical production lead times are 7–21 days depending on product complexity and quantity.
Step 04 — Quality Inspection. All products undergo comprehensive testing per applicable standards. You receive full documentation including Mill Test Certificates, Quality Inspection Reports, and Certificate of Origin.
Step 05 — Delivery. We handle all logistics including packaging, containerization (FCL & LCL), customs documentation, and delivery to your facility. Delivery timelines: EU destinations: 10–15 business days; Middle East: 7–12 business days; Central Asia: 15–20 business days; USA: 20–30 business days. Payment terms: T/T (50% advance + 50% before shipment), Sight L/C, Usance L/C, D/P, and D/A for established customers.
Request a Quote
Prompt Response
Tell us your requirements and our team will respond with a detailed proforma invoice promptly — including pricing, lead time and delivery options.
Common Questions
What types of steel pipes does MetalFromTurkey supply?
We supply a comprehensive range covering energy sector pipes (OCTG casing/tubing, ERW/HFW and SAW line pipes), water transmission pipes (ERW water pipes, galvanized pipes), fire sprinkler pipes (Firesist® range with UL/FM approvals), construction pipes (CHS, piling tubes, anchor pipes), and precision automotive and industrial tubes. Our portfolio includes 100+ product variants across all major steel pipe categories.
What is the minimum order quantity for steel pipes?
Our standard minimum order quantity for steel pipes is 5 tons. However, we understand that project requirements vary, and MOQ flexibility may be available for special projects or ongoing supply agreements. Contact our sales team to discuss your specific needs.
What international standards do your steel pipes meet?
The steel pipes we supply are offered primarily through our core partner mills in Turkey and complemented by selected international supply partners, all aligned with the most widely recognized international standards including API 5L and API 5CT (American Petroleum Institute), EN 10305 series (European precision tube standards), EN 10219 and EN 10210 (structural hollow sections), ASTM A53 and ASTM A500 (American standards), and ISO 3183 (pipeline systems). All products are backed by Mill Test Certificates per EN 10204 (3.1 standard, 3.2 available on request).
Do you offer custom steel pipe sizes and specifications?
Yes. Our supply network's production capabilities support custom outside diameters, wall thicknesses, lengths, material grades, and finishing options. We coordinate directly with our partner mills to manufacture custom-shaped steel profiles per customer drawings. Our technical team can advise on material selection and design optimization.
What coatings are available for steel pipes?
We offer 3-layer polyethylene and polypropylene coatings, fusion bonded epoxy (FBE), abrasion-resistant overlay (ARO), glass fibre reinforced plastic (GRP) coating, liquid epoxy, flow-coat epoxy lining, and hot-dip galvanizing. Coating selection depends on the application environment and customer specification.
How do you ensure steel pipe quality?
Quality assurance is built into every step of our supply chain. Our partner mills hold ISO 9001, IATF 16949, and API Q1 certifications. In addition to mill-level testing, our QA team performs independent verification — including visual and dimensional inspection, mechanical testing (tensile, flattening, expanding), hydrostatic testing, non-destructive inspection aligned with ISO 10893 series, chemical analysis, and metallographic examination as applicable. EN 10204 3.1 certification is standard, with 3.2 third-party countersign available on request. Heat number and lot traceability are maintained for critical product groups. Third-party inspection by SGS, Bureau Veritas, DNV, or Intertek is available upon request.
Do you supply stainless steel pipes as well as carbon steel?
Yes. Our supply range covers both carbon steel and stainless steel pipes. For stainless steel, we offer welded (primarily TIG/GTAW and plasma; EFW in large-diameter applications), seamless, and cold drawn precision tubes in grades including 304/304L, 316/316L, 321, 310S, 317L, 904L, and Duplex 2205/2507. Available for industrial, sanitary, automotive, and hydraulic applications with full material certification per EN 10204 (3.1 standard, 3.2 on request).
How do I choose between 304 and 316 stainless steel?
Choose 304/304L for indoor applications, freshwater systems, food processing in mild environments, and budget-conscious projects without chloride exposure. Choose 316/316L for marine and coastal environments, chemical processing with chlorides, pharmaceutical applications requiring higher purity, and any application with regular chlorine exposure such as water treatment. The 20–30% cost premium for 316L is minimal compared to premature failure from chloride-induced corrosion.
What testing should I require for critical pipe applications?
At minimum: PMI (Positive Material Identification) via XRF to verify correct grade, hydrostatic testing at 1.5× design pressure, visual inspection per ASTM A999, and dimensional verification. For high-consequence applications, add ultrasonic testing (UT) for wall thickness and lamination detection, eddy current testing (ET) for surface defects, radiographic testing (RT) for weld integrity, and liquid penetrant testing (PT) for surface crack detection. We coordinate all testing through our partner mills and accredited laboratories.
Do you offer value-added processing services?
Yes. Through our partner mills and specialized workshops, we offer precision cutting (±0.5 mm tolerance), beveling and threading, surface finishing (electropolishing, passivation, pickling), mandrel and induction bending, and comprehensive testing/inspection (hydrostatic, PMI, NDT). All processing is delivered as part of your order — no need for secondary suppliers.
What documentation do you provide with steel pipe orders?
Each shipment includes: Proforma Invoice, Commercial Invoice, Packing List, Bill of Lading or Airway Bill, Certificate of Origin, Mill Test Certificate (MTC), Quality Inspection Report, and Fumigation Certificate when required.